home *** CD-ROM | disk | FTP | other *** search
- Introduction to NamePal 3.x -- Upgrade
-
- These instructions tell you how to update your current NamePal files with
- this latest version of the program. But first, make a backup copy of your
- current NamePal files, in case something goes wrong during the upgrade.
-
- To upgrade NamePal, put this diskette in your "A" drive, and type either:
-
- A:INSTALL - for floppy diskette users (put your old NamePal diskette
- in the "B" drive, or change disks as requested if you have
- a single drive system).
-
- A:INSTALLH - for hard disk users (this assumes your names are on the "C"
- drive and you are "logged on" to the NamePal sub-directory,
- so you see something like "C:\NP>" on your monitor).
-
- This "install" will copy the following files for you: NAMEPAL.EXE, NP.EXE,
- TRANSFER.EXE, SETUP.NP0, and HELP.NP1. After the INSTALL save the NamePal
- disk you just received as a backup, and continue using your original disk.
-
- NOTE: There are 2 versions on this disk (NAMEPAL.EXE and NP.EXE). The NP.EXE
- is newer and works best with some newer computers (type NP to start). Use
- NP.EXE if the display is blank. For most computers, either version will work.
-